|
|

Our
Wrought Iron Curtain Pole Packs contain all
the necessary pole, brackets, curtain rings, finials and fixings needed
to prepare a standard window for hanging your curtains. Alternatively,
pole and accessories can now be purchased separately to make up a Custom
Pole order to suit your individual requirements.
Pole packs and Custom pole
Curtain pole is
available in 16 and 25mm diameters and in two finishes: Satin Black
and Polished Steel. 16mm pole is made from solid bright mild steel bar,
whereas the 25mm pole is mild steel tube - solid bar would be too heavy
and impractical at this diameter.Brackets
are 'sleeve' type and are supplied with grub screws and allen key for
locking the pole into the brackets. All brackets allow a pole projection
of 60mm from wall to inside edge of the curtain pole. Brackets come
with screws and wall plugs for fixing into masonry or wood. If specialist
fixings are required, such as for fixing into plasterboard, you will
need to obtain these separately. Finials are fixed onto the pole ends
with locking grubs screws and can be removed and re-attached at any
time to allow removal of curtains, etc.
|
Measuring
windows for your curtain pole
|
-
Measure
the width of your window, including frame
-
Add
on a minimum of 10cm each side to allow for brackets
and curtain gather - add more depending on curtain width
and thickness
-
Minimum
pole length required = window width + 10cm + 10cm
-
Don't
forget to take finial length into account if you have
restricted space for your pole.
-
Note
that approx. 2cm of pole is inserted into each finial
for fixing
|
|
|
Pole
Packs
|
|
Our
Wrought Iron Curtain Pole Packs contain all the necessary pole,
brackets, curtain rings and fixings needed to prepare a standard
window for hanging your curtains. Available
with 7 set lengths of pole, from 100cm up to 400cm, poles can be
trimmed as necessary.
Packs are available
with or without finials and curtain rings. Rings are supplied at
1 ring for every 10cm of pole (rounded up to an even number). More
can be bought separately if needed from the Custom Pole section
of this page extra rings
Poles below
200cm in length are supplied in one piece with 2 brackets. Poles
200cm and up are supplied in 2 halves and will include a joining
centre bracket. Therefore,
a 200cm Pole Pack will consist of 2 lengths of 100cm pole which
will be joined by the centre bracket when fitted, a 250cm Pole Pack
will be 2 lengths of 125cm, etc. See individual packs for details.
|
back to top
Custom
Pole and Accessories
|
|
Pole,
brackets, curtain rings, finials and holdbacks are available
here to buy individually to make up a custom order
|
Curtain
pole and brackets
Sold in
multiples of 1cm, pole can be ordered in any single uncut
length up to 250cm (approx 8 feet). If you require a pole
longer than 250cm, you can order two lengths and join them
with a joining centre bracket. Any pole ordered that is longer
than 250cm will automatically be supplied in 2 halves and
will therefore require a joining bracket. For example, if
you need a 350cm pole, this would require 2 lengths of 175cm
pole, 2 standard brackets and 1 joining centre bracket. Theoretically,
any pole length can be made up as long as you use a joining
bracket between each span of pole. We will check with you
before dispatching if there is any uncertainty about the order.
Special instructions or clarifications can also be submitted
in the comments box at the checkout stage.
All poles
will need at least 2 brackets. We would recommend an additional
centre bracket for any pole over 200cm, for heavier weight
curtains. A centre bracket has the back fixing plate running
horizontally, taking up less vertical space when fitted above
a window frame where space between frame and ceiling is often
limited. Where a pole will be fitted into a recess or where
one end butts up against a wall, recess brackets can be used.
Curtain rings
If you are
not sure of the number of rings required (as determined by your
curtain maker or supplier) a good guide is to use 1 ring to
every 10cm of pole. Round up if this will lead to an odd number
so that a pair of curtains will always have the same number
of rings each side (e.g. a 250cm pole would require 26 rings
not 25). Heavier curtains will glide more easily along the pole
with more rings as this spreads the weight more evenly.
Finials and Holdbacks
Finials
not only add the finishing flourish to your pole but they
also serve to stop the curtain slipping off the end!
Finials
and Holdbacks can be ordered as single items rather than in
pairs to allow flexibility. Some styles are handed so you
will have to choose left and/or right hand variants when adding
to basket. Handed items are also available in pairs for simplicity.
Please
contact us if you have any queries.
|
back to top
Back
to The Collection
Curtain
Poles Home
The
Northdowns Ironcraft Company The
Barn Maple House Stockbury
Sittingbourne Kent
UK ME9 7QT
Copyright
©
The
Northdowns Ironcraft Co. 2001-2011, all
rights reserved
E&OE. Terms
& Conditions - Privacy
|